David Gerard@awful.systemsM to TechTakes@awful.systemsEnglish · 22 hours agoYou can’t feed generative AI on ‘bad’ data then filter it for only ‘good’ datapivot-to-ai.comexternal-linkmessage-square36linkfedilinkarrow-up179arrow-down10file-text
arrow-up179arrow-down1external-linkYou can’t feed generative AI on ‘bad’ data then filter it for only ‘good’ datapivot-to-ai.comDavid Gerard@awful.systemsM to TechTakes@awful.systemsEnglish · 22 hours agomessage-square36linkfedilinkfile-text
minus-squareswlabr@awful.systemslinkfedilinkEnglisharrow-up7·10 hours agowhat is this “alignment” you speak of? I’ve never heard of this before
minus-squarefroztbyte@awful.systemslinkfedilinkEnglisharrow-up10·10 hours agoit’s when you have to get the AI slotted up just right in the printer, otherwise it wedges stuck and you have to disassemble the whole thing
minus-squareDragon Rider (drag)@lemmy.nzlinkfedilinkEnglisharrow-up2arrow-down6·10 hours agohttps://en.wikipedia.org/wiki/AI_alignment
minus-squareswlabr@awful.systemslinkfedilinkEnglisharrow-up7·10 hours agoSorry, as mentioned elsewhere in the thread I can’t open links. Looks like froztbyte explained it though, thanks!
what is this “alignment” you speak of? I’ve never heard of this before
it’s when you have to get the AI slotted up just right in the printer, otherwise it wedges stuck and you have to disassemble the whole thing
https://en.wikipedia.org/wiki/AI_alignment
Sorry, as mentioned elsewhere in the thread I can’t open links. Looks like froztbyte explained it though, thanks!