If you’re using the AIO image, backup/restore can handled for you, so no need to worry about the manual steps involved. Or if you’re using a VM, a backup can take the form of full system snapshots, so also no need to understand how data are stored. Granted it’s always helpful to know what your running, but not necessarily requisite, even for backups.

Absolutely. I actually have an upgrade already planned, but it’s just that it’s not because I can’t run VMs, it’s more that I want to run more hungry services than will fit on those resources, whatever virtualisation layers were being used. The fact that it’s an easy fix to more a VM/lxc to a new host is absolutely it, though.

Am I looking at the wrong device? Beelink EQ15 looks like it has an N150 and looks like 16GB of ram? That’s plenty for quite few VMs. I run an N100 minipc with only 8GB of RAM and about half a dozen VMs and a similar number of LXC containers. As long as you’re careful about only provisioning what each VM actually needs, it can be plenty.

Why would you use an LLM for this? This sounds like a process easily handled by conventional logic, which would be cheaper, faster, and actually reliable… (The ‘notes’ part notwithstanding I guess, but calculations in general are definitely not a good use of an LLM)

Or use both. That’s what I do, they serve suitably different needs for different situations, even if there is an overlap, and it’s not like they’re heavy tools

But then for that you have distrobox, which is great. If that’s not enough, running another OS is also trivial, so that downside really is only ‘kinda’, as you say!

Also this Voyager/Frasier crossover (skit, rather than episode) https://www.youtube.com/watch?v=BIeEyDETaHY

They’re referring (I believe) to the screenshot right at the top of the article, which includes this absurd calculation:

border-radius: max (0px, min(8px, calc( (100vw - 4px - 100%) * 9999)) );

My guess (hope!) is that this is not ‘serious’ code, but padding for the sake of a screenshot to demonstrate that it’s possible to use each of these different features (not that you should!).

Don’t even need to remote in to anything, just store your working code on a network share

Grew up on Armada and Away Team, but of those, Away Team was definitely my favourite!

More recently played Elite Force, which was also pretty dang great.

Not sure why people here are all arguing about why you would want to use discs, rather than the fact that the Steam Deck is a PC, of course you can absolutely used discs. All you need to do is plug in a USB disc drive, and it’s ready to go. I’ve installed a bunch of my older PC games from CD/DVD that way, and it works great. Even under Linux, applications like Lutris make installing Windows game discs pretty easy, and once they’re installed, you’re ready to go.

Yes, CUPS is what I’m talking about there being no good way of setting it up. (Obviously can’t be a flatpak, and no dice installing it with distrobox – trivially, at least – too tied to the system, I think)

I use it as my only personal (i.e. not work or shared) machine, and it is absolutely great. I expected to be installing a ‘proper’ linux distro on an external drive for the docked use-case, and it has turned out to be completely unnecessary. For those things not available as flatpak, distrobox/podman has been great. (The only thing that slightly irks me that is missing is support for a printing service, but I haven’t tried that hard to fiddle with that, since I can do it from my phone on those rare occasions I need to.)

To say I’m annoyed would be very much overstating it, just a (very minor) eye-roll at one small line in a generally very good article. Just the bit quoted:

currency symbols other than the $ (kind of tells you who invented computers, doesn’t it?)

So they could also be attributing it to some other country that uses $ for their currency, which is a few, but it seems most likely to be suggesting USD.

Well, it’s not really clear-cut, which is part of my point, but probably the 2 most significant people I could think of would be Babbage and Turing, both of whom were English. Definitely could make arguments about what is or isn’t considered a ‘computer’, to the point where it’s fuzzy, but regardless of how you look at it, ‘computers were invented in America’ is rather a stretch.

currency symbols other than the $ (kind of tells you who invented computers, doesn’t it?)

Who wants to tell the author that not everything was invented in the US? (And computers certainly weren’t)

Onlyoffice does now have an ARM version, I run it on a raspberry pi 4 (integrated with seafile), and it works fairly well. Can’t vouch for how much power it needs, to say if a pi 3b+ will be enough, though. Pretty sure it’s lighter than collabora, since more is done on the client side.

I agree with the other commenter that suggested cryptpad, though. If all you’re after is a Google docs like collaborative experience, cryptpad is brilliant, and much more resource friendly. (The office editor it uses is also a slightly modified Onlyoffice, so almost exactly the same feature set)

Most things, if not available as flatpak, can be installed inside another distro on distrobox. It runs in containers, so things can access a root filesystem (Just not the main SteamOS one), and is a pretty seamless experience, once installed. I have a bunch of non-flatpak software running that way, and it works great.

See https://www.gamingonlinux.com/2022/09/distrobox-can-open-up-the-steam-deck-to-a-whole-new-world/