I didn’t say it wasn’t convenient. I said it was counter intuitive.

That’s pretty much the standard.

• On iPhones and iPads, swipe from the left to go back. In a book on such a device, swipe from the right to go forward.
• On eReaders, particularly Kindles, tap on the right side to go forward; tap on the left side to go back.
• On Android with gestures enabled, swipe from the left side to go back. Or… swipe from the right side to go back. Counter intuitive but apparently at least one person uses that.

Assuming OP has standard gestures enabled, they could still swipe from the left side.

And then what?

Being operated by a right leaning organization isn’t the same as having a right leaning user base, though

Is that only true if you recognize that Dems are right of center?

Only if you have a sign posted, reading “All ye who enter here forfeit thine selves – body, mind, spirit, and soul – to the owner of these lands, until such time as ye leave or are slain,” with the sign carved from stone by hand, with a willowbark dagger, blessed under the light of a blood moon, approximately eight feet tall, flanked by two shrubberies – that look nice and are not too expensive – and visible to all who enter, lit eternal by the captured light of the new moon.

The system is still “PC” in this case, even if technically the platform is different. And since you have to log into your account with their service, they can easily confirm that you own the game.

I don’t have to create an account to play Slay the Spire on Android.

IMO, yes. I think it would make people more, rather than less, inclined to comment on a cross-post made in a smaller communities, since then their comment would be more visible.

The main concern I can see being raised is potentially leading to brigading? I’m not sure if that’s much of an issue on Lemmy and I would assume being able to de-federate would mitigate that substantially.

Can’t you turn on Developer Mode to enable third party slicers?

I believe you set env vars on Windows through System Properties -> Advanced -> Environment Variables.

I believe you just need to set the env var OLLAMA_HOST to 0.0.0.0:11434 and then restart Ollama.

What OS is your server running? Do you have an Android phone or an iPhone?

In either case all you likely need to do is expose the port and then access your server by IP on that port with an appropriate client.

In Ollama you can expose the port to your local network by changing the bind address from 127.0.0.1 to 0.0.0.0

Regarding clients: on iOS you can use Enchanted or Apollo to connect to Ollama.

On Android there are likely comparable apps.

Please, enlighten me - how do you propose we use the term “AI” in a way that’s more useful than a definition that includes machine learning, large language models, and computer vision?

I doubt I’ll agree with your definition, but I’m curious to see how you would exclude machine learning, computer vision, LLMs, etc., from your definition. My assumption is that your definition is going to be either a derivative of “AI is anything computers can’t do yet” or based on pop culture / sci fi, but maybe you’ll surprise me.

To be clear, I’m a software engineer; I’m not speaking in sales speak. I’ve derived my understanding of the term from a combination of its historical context and how it’s used in both professional and academic contexts, not from marketing propaganda or from sci fi and pop culture. I’m certainly aware of the hype machine that’s ongoing, but there are also tons of fascinating advancements happening on a regular basis, and the term “AI” is at minimum a useful term to refer to technologies that leverage similar techniques.

I think of the Bambu P1S as the inexpensive alternative to the Bambu X1C or a comparable printer from Prusa, at least in terms of print consistency and ease of use.

My Bambu was my fourth 3D printer (second FDM printer) and it took 3D printing from a frustrating, time consuming hobby to just a thing I do to enable other hobbies. I don’t have to spend time tweaking settings to get a decent print, because the default settings are already good enough. Instead, I can focus on designing models or working with finished prints.

it’s not ‘ai’, it’s just a poorly trained voice recognition system that’s trying to decipher any random person’s voice.

I’m baffled that you can say “It’s not ‘AI,’ it’s a machine learning powered speech to text system” with a straight face.

Even if we were to agree that ML-powered speech to text isn’t AI (and I don’t agree to that premise, for the record), there’s still the matter of processing the transcription to transform it into something that can be understood by the point of sale system - aka natural language processing. And while that NLP could be implemented without use of an LLM, given LLM’s current level of hype and the ease with which they can be shoved into any given product, I wouldn’t bet on Taco Bell execs approving such an approach, much less asking for it.

I’ll have to check out both OpenSCAD and Code Comic. Some completely non-CAD DSLs that you might be interested in, since you mentioned GraphViz:

Mermaid.js does something very similar to Graphviz. There are a couple other similar tools like that out there, but Mermaid is supported in a lot of places natively or as an easy to use plugin, like GitHub Markdown (and other git forges like Forgejo), Hedgedoc, Obsidian, SilverBullet, etc…

I’d also argue that LaTeX counts, and to a lesser extent, Markdown - compare using them to using Word.

And reveal.js is an equivalent for slide deck creation that would normally be done with PowerPoint.

For reference, Anthropic is currently valued at $183 Billion and their annual recurring revenue is currently $5 Billion (up from $1 Billion in 2024). So this will cost them roughly 30% of their current annual revenue.

If you’re a size 4-24, the Gloria Vanderbilt “Amanda” line has a variety of jeans with almost bo embellishments. They come in multiple shades of blue, black, mint, khaki, white, off white, etc… The colors other than blue are a bit stiffer and less stretchy, but they fit very similarly. They also have “Ponte pants,” basically business casual dress pants (though basically only in black), which I also recommend. I’ve worn the black jeans to the office mid-week and could probably get away with wearing the khaki ones, too.

I get them at Kohl’s, but from a quick web search I see they’re also available at Amazon, Walmart, JC Penny, Macy’s, and Costco. MSRP is around $50, but I don’t think I’ve ever paid more than $30 for a pair. I see some listed at $20 or so right now and I think I’ve gotten some (maybe on clearance?) for as cheap as $15.

Do NOT buy the “Pull-On” versions! Those either lack pockets entirely or have inadequate pockets. I could fit my phone in, sideways, but it dug into my side (my hipbone, I think, though it’s been a while since I wore those and tried to use the pockets).

Sizing is split between products (at Kohl’s at least): 4-18 and 16W-24W, with 16W being one size above 18 as opposed to overlapping. There are also Short (or Petite in the Ponte Pants) and T/L variants.

For reference, I have a standard sized iPhone - specifically the 15 Pro - in a case, with a MagSafe wallet. I often carry a similarly sized work phone in the same pocket, also in a case, so my pockets need to be able to handle both. The top of my phone is basically flush with / right below the opening of the pocket, which I prefer. A taller phone, like a Pro Max iPhone, would fit, but would need angled a bit to not have the top poking out.

Some other info on these:

• The fit, for me at least, is comfortably snug, but not tight. The cut is flattering, but not lewd.
• Durability is better than expected for fairly stretchy jeans. I ended up with a hole in the first pair I bought after a year or so, just from walking around (inner thigh friction basically) - but to be fair at that point I was wearing them twice a week, so that’s like 100 wears, 50 or so washes… I think that’s reasonable. However I don’t think they’d hold up as well if I wore them while doing yard work or something similarly stressful.
• Sizing down - I can fit into up to two sizes down, but even one size down: the fit wasn’t flattering, they were less comfortable, and they were so tight that my phone barely fit into my pocket (and wouldn’t have fit if I were sitting).
• Sizing up - one size up is great. I haven’t tried two sizes up. The fit isn’t as flattering, but it’s still fine. I generally wear a belt when wearing a sized up pair, since the waistband ends up a bit loose otherwise, but they’re still snug around my hips, so they stay up well enough without a belt.

If you’re a size 0 or a size 2 and don’t want to size up, they sadly aren’t an option (I may be wrong - their size chart goes down to 2, but I didn’t see any offered in a 2). If so I can keep an eye open for decent jeans in that size range, but I won’t be able to speak to fit, of course, as I’m nowhere near a size 2 myself.

He’s definitely innocent. Sorry, thought I had an “allegedly” in there. Gonna edit my comment to add one now, thanks for calling that out

To be clear, I’m not saying most women’s pants have pockets. I’m saying that there are options, and I’m of the opinion that if you care about something enough to complain about it, you should also care about it enough to do something about it.

I own dozens of pairs of women’s pants and shorts with pockets large enough to comfortably fit my cell phone. Several pairs where I can not-so-comfortably. Probably a dozen each of dresses and skirts with decent pockets, too.

Would you like some recommendations?