- cross-posted to:
- utilitycycling@slrpnk.net
- cross-posted to:
- utilitycycling@slrpnk.net
I had been looking for a bike to get around my local city and managed to snag a Huffy cruiser for $50. It is in decent shape with only some superficial rust on the pedals. This will be a big learning experience for me as I haven’t ridden a bike for nine years. I’ll both learn how to use a bike to run errands and how to do some of my own maintenance. Maybe even customize it a bit by adding a frame lock and a 3 speed gear hub. I guess we shall see how far I get in this learning and fitness quest.
You must log in or register to comment.
Pro tip - replace sadle and pedals.
Saddle is individual you have to try what fits you.
For me flat pedals with spikes (the MTB type) is go to, but it can damage shoes. For me it is not that bad, new shoes and 6 months of riding on them didn’t do any damage. They give more stability and support to your feet.
Plastic bmx pedals such as odyssey twisters are great option, less harsh for the shoes than ones with metal screws. Also way cheaper
Though finding any kind of pedals might be difficult with 1pc cranks, since those usually require pedals with 1/2" axles…
So the rear wheel on a bike I am riding has a spoke that broke, getting that fixed but it caused the chain to slip enough that it kicked around and stabbed the back of my calf. The bike is a Raliegh like an m20 or such? Any advice on making sure the chain won’t slip once the spoke is replaced (assuming the wheel is proper once replaced)
For me flat pedals with spikes (the MTB type) is go to, but it can damage shoes.
I wear Saucony trail runners, and have for the last 6000km (?) of riding, as well as for daily wear. They are in remarkable condition, considering that I do ride with spiked flat pedals.
Not sure if it’s the sole compound or what, but I purchased these specifically because I was tired of replacing my regular running shoes every year.
If you’re burning through shoes quickly, you might want to check those out.
I wear Columbia shoes also for this reason. All other shoes got torn apart, are uncomfortable or doesn’t fit. These I wear dayly for few years and when the sole is worn out I replace them.
Few people suggested that I need some specific MTB shoes but I can’t see any advantage in them.
Also water resistant shoes are usually bad. They also get wet and dry slowly, swety in summer… I got some water resistant socks and use them when needed.
Also water resistant shoes are usually bad.
One of my trail runners have gortex on them, the other does not. I honestly can’t tell the difference with real-world use. Both get wet on the inside if you get them wet on the outside. LOL
I got some water resistant socks and use them when needed.
If it’s really cold (< -10C) I’ll use neoprene overshoes. If it’s raining, I have packable rain pains that have shoe covers built in, so that’s never an issue.
I haven’t tried water resistant socks, but that sounds interesting!
Edit: -10C not -20C! I’m crazy, but not THAT crazy. 😂🥶
Are bikes hard to come by where you live? I wouldn’t pay money for a rusted one. I just grabbed a late 80s mid range road bike for that price. If the cassette or other parts start giving you trouble you could spend $100 more just restoring it and huffys are known for installing the cheapest components. Just ride it and don’t go chasing gremlins you might find a better used bike next time.
If the chain is rusted, replace that. Also check the brake pads, if they are crumbly replace them. In my experience colored tires are lousy with puncture protection so if you start getting a lot of flats you may want to grab some better tires on Amazon. Have fun and stay safe! I commuted for 20 years and the countless near misses definitely leaves a toll on you.
The chain is fine. Like I said, the only rust I saw was a little bit on the pedal. It is a single speed so there is no cassette. I dont plan on spending loads of money on the bike. I just wanted one I would feel bad if I messed up while disassembling it or used the wrong cleaning product on.
My advice: replace the pedals to deal with the rust issue, and whatever you get for replacement, try to get those with reflectors. And please install front and rear lights and a bell or horn.
This is a great plan, sounds like it will be a lot of fun and you’ll learn a lot. All the best and do post updates!
I’m currently working on a DIY pannier/saddle bag, Ill definitely post pics once I’m finished.
