#photography nerditry:
I’ve been playing with the Rogeti RG1 geared tripod head, and I’m liking it more than I expected to. Rogeti is a small specialized Chinese manufacturer; the tripod head is their flagship product. Compared with the Arca C1 Cube (my go-to), it’s a bit smaller and lighter, but the thing that’s really growing on me is the interchangeable modules for z-axis (panning) movements.
It’s not cheap (about USD900), and there are a few annoying quirks, but I’m using it more and more.
Neglected to include links:
Rogeti: https://rogeti.com/products/rg1
Linhof: https://linhof.com/en/3d-micro/
Arca: https://arca-swiss-usa.com/products/c1-cube-geared-tripod-head
Disclaimer: I bought, borrowed, or rented everything discussed here, with my own damn money, not vendor freebies. Don’t bother liking or subscribing to my youtube channel, because I don’t have one. And my links are just links, not “affiliate” advertising.
I don’t even have cookies on my own web site. It’s not necessary to monetize every human interaction.
@mattblaze@federate.social You monster! 👀
@mattblaze@federate.social
I only follow you for the great photos and the occasional recap of the story of locksmiths trying to run you out of town
All that is predicated on my process for composing geometrically precise architectural photos (zero or single point perspective), which is roughly:
Find a good view of the subject and put the tripod there (Google street view is often helpful for preparation).
Use the LOWER pan control to aim the camera approximately toward the subject.
Use the X and Y controls to level the camera, using spirit levels on the camera body. This should make vertical lines on the subject vertical.
…
…
Use the TOP pan to rotate the camera parallel to the main face of the subject, until horizontal lines on that face of the subject appear horizontal.
Use shift on the camera to compose the final framing.
Finally, at long last, capture the image exposure at an opportune moment.
Note that most lenses have some geometric distortion, especially toward the edge of the circle. You can correct that in post, but in the view, it’s best to use the center of the frame to check geometry.
So, basically, what I generally do is work from the bottom tripod and camera controls toward the top, in a way that avoids needing to re-adjust controls once I’ve properly set them.
@mattblaze@federate.social
So much of the tech you mention is way over my head (and budget) but I look things up and have learned from your posts. Thank you!
Anyway, all this should help explain why I’m somewhat obsessed with optimizing my tripod and tripod head setup. It’s what I’m interacting with most closely when I’m actually making a photo, even more than the camera and lenses, and it’s the stuff for which errors are often very hard to correct after you’ve made the exposure.
It’s also why I’m impossibly slow and annoying to be around when I’m making pictures.