• AnonTwo
      link
      fedilink
      461 year ago

      Isn’t the main issue whether or not there’s an ease to replace? There’s like 20 steps and a bunch of easily breakable cables involved with replacing it currently.

      I mean I think you can replace the Switch’s battery too by that standard.

      Same site even says it’s only 1 extra step in total, though instead of the cables being in the way, it sounds like the shields a bit more difficult.

      But like either of these replacements would require a technical user to do it.

      • keeb420
        link
        fedilink
        61 year ago

        it should be done by 2027 at the latest it sounds like.

      • @lackthought@lemmy.sdf.org
        link
        fedilink
        English
        01 year ago

        ‘ease to replace’ to whom?

        seems like an impossible to define standard, but I’d be interested to hear what the requirements are

        if they supply the necessary tools and steps/videos, is that enough?

        • AnonTwo
          link
          fedilink
          21 year ago

          Given SLaSZT already gave an answer in

          https://kbin.social/m/games@sh.itjust.works/t/202790/Gaming-handhelds-like-the-Switch-and-Steam-Deck-will-need#entry-comment-836808

          Which isn’t far from this post

          I don’t think you asked this in good faith.

          A battery that can be popped out and replaced, with no tools and no risk of damaging any of the other hardware on the board.

          Just supplying the tools and steps is absolutely not enough. We’re talking about replacing a part on a $300+ machine. Most people would be scared to do that purely on the merits they couldn’t afford to replace if something went wrong.

          • BarterClub
            link
            fedilink
            English
            11 year ago

            True. But this is 10 years old now. Are we going to reduce water resistance over ease of use to repair? Might be. But where so we draw the line?

            It’s going to be interesting to see the requirements. I’m hoping for somewhere between ease and keeping water resistance up.

      • @sorenant@lemmy.world
        link
        fedilink
        English
        26
        edit-2
        1 year ago

        And requires heating + prying.

        If this is considered replaceable, I wonder what an non-replaceable battery would be. Soldered to the main board and trying to unsolder it causes a failsafe to short the CPU?

        • keeb420
          link
          fedilink
          51 year ago

          its an easy fix. replace the adhesive with stretch release battery adhesive.

        • Sterben
          link
          fedilink
          English
          11 year ago

          Non replaceable batteries are on iPhones, since they are paired with the motherboard, and if you replace it, iOS will keep warning you every day about a non genuine battery presents in your device.

    • SLaSZT
      link
      fedilink
      17
      edit-2
      1 year ago

      Nah. The battery on my old Samsung Galaxy S4 literally just pops out with minor force applied as soon as the cover is off, leaving the phone ready for a new one to be slotted in. That is what “user replaceable” means.

      Don’t get me wrong, I am familiar with electronics, have a diploma in electrical engineering, have soldered hundreds/thousands of components, etc. and I could do this easily (though I have concerns about heating the battery). But most people cannot currently replace the battery without significant headaches.

    • @woelkchen@lemmy.world
      link
      fedilink
      English
      151 year ago

      Steam deck done.

      Not really. Look up the Linus Tech Tips teardown. The battery is glued in super hard. Linus said he spoke to Valve about that and according to him Valve said they’re looking into making it easier to replace at a later date. Since then I’ve not seen any reports about a change.

    • @juliebean@lemm.ee
      link
      fedilink
      English
      91 year ago

      i think ‘user replaceable’ should involve no tools, and a minimum of time. if step one involves removing eight tiny screws, and it only gets more cumbersome from there, i don’t think it counts.

      • @faeranne@lemmy.blahaj.zone
        link
        fedilink
        English
        101 year ago

        The currebt rule says “No propritary tools” which seems reasonable when you add in that glueing in is considered “non-replacable” too. The GBA SP needed a single screw to hold in it’s battery and nothing else. Plus with proper threading, screws last much longer than plastic clips.

      • @73ms@sopuli.xyz
        link
        fedilink
        English
        31 year ago

        There’s something to be said for this as well certainly but I do think the deck is still much better overall than will be required since they actually offer spare parts for sale for pretty much everything and repair guides too.

    • I Cast Fist
      link
      fedilink
      English
      11 year ago

      The steam deck battery is glued on? Fucking seriously? Jesus