Elon Musk says ‘we dug our own grave’ with the Cybertruck as he warns Tesla faces enormous production challenges::Tesla CEO Elon Musk said Wednesday that the Cybertruck’s unique design means the company faces immense challenges in scaling production.
Cool. Build 10 pieces and fit them together with sub 10 micron precision.
Ok, and once that’s done with the high level of repeatability and quality I’ve done it a thousand times, then what?
Which printer is giving you 1 micron precision?
It depends on the model being printed.
1 micron is easy to achieve on the Z axis with almost any printer, using any 3d printing technology (FDM/SLP/SLA/etc).
In the X/Y axis, the vast majority of FDM printers are off the table for 1 micron - increasingly so as the Z height of the model increases, especially on bed-slingers like the Ender 3. The taller the model, the harder it is to maintain accuracy on X and Y.
In SLA/DLP printers, it’s all about the motor, controller, and whatever shields excess light/beam diameter.
To answer your question directly: I have no trouble getting highly reliable micron accuracy in a $99 Creality Halot. The key is to understand your model in relation to the pixel density of the screen. Some calibration prints tell you where the steps are, describing the relationship between input and output - which will most certainly be different from printer to printer at the consumer level. Once you have that data, some simple math tells you exactly how to design your object in a way that takes these natural constraints into consideration.
Yes - at any scale, even at the size of a car…or a battleship. When you accept the constraints of the hardware into the design of the object being produced, you can get micron repeatability out of just about anything.
Oh I see… You’ve confused microns with Thou (aka mils)… much like Elon has.
Nope.
So does that mean that you can get 1 micron accuracy as long as the part is sized to a multiple of the pixels width on the x and y? Is that just for aligned straight edges or can that be done for curves too?
The pixel alignment is a good place to start, but no 2 printers will produce an identical result at that level. That’s why it’s important to tune the model to the printer - not the other way around.
Can you get it on curves? Yes, certainly. For 3d printers, even the position you choose for the model within the build area makes a difference.
The question is really about executing the process of engineering in the correct order.
The most common mistake is to design the thing you want to build first. In reality, you start with what is essentially a sketch of what a functional end product looks like. Then, you buy/build tools/manufacturing equipment. Finally, you refine your sketch into a manufacturable product based on assessment of the most reliably repeatable results available from the actual machinery as it is installed.
deleted by creator
Seems like a reasonable next step!
Scale that up to a 4 ton production-ready consumer vehicle without introducing defects, I imagine
The heaviest Tesla is around 2.5 tons…but that’s beside the point.
The scale doesn’t matter. In fact, taking a desktop process and industrializing it makes it more accurate and repeatable - especially in a large-item manufacturing setting.
The best argument against the 1 micron requirement is that it’s unnecessary from a practical standpoint. I completely agree with that, for sure.
Then take them to a different environment and measure them and then put a Lil water on them and measure them. Then get a mechanic to fix them and then shove it up your butt because any real engineer designing a car would tell you that kinda precision is just fucking stupid at production level for a car
I’ve already said a dozen times: no shit Sherlock, this is absolutely unnecessary for this application.
It’s also completely irrelevant to change up the environmental parameters when that is not a constraint set at the outset of this conversation.
I swear to God, it’s like there’s an entire subspecies of moron non-engineers who exist for the sole purpose of arguing where no argument exists.
A car doesn’t go through environmental changes? Because we are talking about engineering a car. You are talking about your 3d printed dildo of musks cock or something that you got into microns or some shit. It’s almost like there’s a entire subspecies of moron non-engineers who exist for the sole purpose of arguing about why musks cock is microns… you asked what to do next
Are you still arguing with a ghost? Nobody said a car doesn’t go through environmental changes… It just has nothing to do with this discussion.