Hey y’all. I am trying to do a max perimeter style print, and want to know how to remove these smaller sections. I know I could reduce wall count until I remove them, however that isnt dynamic, and leaves larger gaps than I want in other areas. Is there a setting in PrusaSlicer im missing? I messed around with a few but they didnt give me the results I was looking for.

    • Rikudou_SageA
      link
      English
      41 year ago

      Isn’t that possible only for top/bottom layer?

      • @kek_w_lol@lemmy.one
        link
        fedilink
        English
        2
        edit-2
        1 year ago

        Set top and bottom solid layers to 1. Set infill to concentric and then set infill percentage to 100%.

        It should get rid of most triangles.

        • @Xzi@lemmy.worldOP
          link
          fedilink
          English
          21 year ago

          Unfortunately that has the same issue as well. These triangles are due to the 3 closest perimeter lines meeting, thus concentric ends up with the same issue.

          • @kek_w_lol@lemmy.one
            link
            fedilink
            English
            01 year ago

            Then I am afraid you can’t eliminate all triangles. If you had an extruder with variable extrusion width, then it might have worked. Why are you trying to eliminate the triangles anyway?

    • @Xzi@lemmy.worldOP
      link
      fedilink
      English
      31 year ago

      Yellow is perimeter lines, the goal is to not use infill at all, and to just use multiple perimeter passes.